|
Busbar insulating shrouds/Boots are flexible, reusable, electrical insulating covers for busbar and switchgear connections. These pliable shrouds/boots can be installed, removed or replaced in few minutes. Made from poyvinyl Chloride (PVC) material, it is formulated specifically for electrical applications at high voltage.
|
|
| |
- Suitable for insulating busbar joint works applications (tees, elbows, etc)
- Special buttons makes it quick to install, remove or replace during maintenance.
- Highly resistant to UV rays and ozone. Good for outdoor or indoor application.
- New design moulds can be developed in a week.
- Provide significant reduction in air clearances.
- Excellent electrical & thermal properties.
- Customised design possible as per end application.
|
|
|
| |
|
|
|
|
Test Description
|
Recorded Value
|
Test Method |
| Dielectric Strength |
12 KV/mm. |
ASTM D149 |
| Tensile strength |
8 N/mm2 |
ASTM D638 |
| Elongation |
350 % |
ASTM D638 |
| Density |
1.23 gm/cm3 |
ASTM D792 |
| Hardness |
70 ± 5shore A |
ASTM D2240 |
| Continuous Operating Temp. |
-20OC to 115OC |
IC 216 |
| Flammability |
Self Extinguishing |
ASTM D 876 |
|
|
